Maintenance - Bosch PS11-102 Operating/Safety Instructions Manual

2610056734 02-21 PS11_BM 2610022006 04-12.qxp 2/15/21 10:39 AM Page 14
INSIDE. Preventive
performed by un au thorized personnel
may result in misplacing of internal
wires and components which could
cause serious hazard. We recom mend
that all tool service be performed by a
Bosch Factory Service Center or
Authorized Bosch Service Station.
SERVICE MEN: Disconnect tool and/or
charger from power source before
servicing.
BATTERIES
Be alert for battery packs that are
nearing their end of life. If you notice
decreased tool
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do so
can cause the tool to operate improperly
or damage the charger.
TOOL LUBRICATION
Your Bosch tool has been properly
lubricated and is ready for use.

maintenance

To avoid accidents, always disconnect the tool and/or charger from
the power supply before cleaning.
Service
NO USER
SERVICEABLE PARTS
maintenance
performance
D.C. MOTORS
The motor in your tool has been
engineered for many hours of dependable
service. To maintain peak efficiency of
the motor, we recommend it be
examined every six months. Only a
genuine Bosch replacement motor
specially designed for your tool should be
used.
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household
detergents that contain ammonia.
Ventilation openings and switch levers
or
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through opening.
-14-
Cleaning
Certain cleaning agents
and solvents damage