2002/96/EG über Elektro- und Elektronik- Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann Altgeräte und ihrer Umsetzung in nationales ist dies von Bosch oder einer autorisierten Kundendienststel- Recht müssen nicht mehr gebrauchsfähige le für Bosch-Elektrowerkzeuge auszuführen, um Sicherheits- Elektrowerkzeuge getrennt gesammelt und gefährdungen zu vermeiden.
Page 7
The tool insert can jam and job better and safer at the rate for which it was designed. lead to loss of control over the power tool. Bosch Power Tools 1 609 92A 04D | (19.12.12)
Intended Use Wear hearing protection! The machine is intended for hammer drilling in concrete, PBH 2800 RE/PBH 2900 RE/PBH 2900 FRE/ brick and stone, as well as for light chiselling work. It is also PBH 3000 FRE Set: suitable for drilling without impact in wood, metal, ceramic and plastic.
17 to the required position. Then tighten the wing bolt 16 again in clockwise direction. Robert Bosch GmbH, Power Tools Division Adjusting the Drilling Depth (see figure B) D-70745 Leinfelden-Echterdingen Leinfelden, 14.12.2012 The required drilling depth X can be set with the depth stop –...
Mounting the Key Type Drill Chuck (Accessory) drill bit centres itself upon drilling. (PBH 2800 RE/PBH 2900 RE) (see figure C) Removing SDS-plus Drilling Tools (see figure H) – Screw the SDS-plus adapter shank 22 into a key type drill –...
– Press the button for depth stop adjustment 15 and remove PBH 2800 RE/PBH 2900 RE/PBH 2900 FRE/ the depth stop 18. Press button 15 again and insert the PBH 3000 FRE Set dust extraction attachment into the auxiliary handle 17 from the front.
OBJ_BUCH-318-005.book Page 20 Wednesday, December 19, 2012 1:09 PM 20 | English Setting the Speed/Impact Rate PBH 2800 RE/PBH 2900 RE/PBH 2900 FRE/ The speed/impact rate of the switched on power tool can be PBH 3000 FRE Set variably adjusted, depending on how far the On/Off switch 8 Vario-Lock position for adjustment of the is pressed.
Phone: +61 3 95415555 If the replacement of the supply cord is necessary, this has to www.bosch.com.au be done by Bosch or an authorized Bosch service agent in or- der to avoid a safety hazard. Republic of South Africa If the machine should fail despite the care taken in manufac-...