Table of Contents
Advertisement
CAUTION: To prevent personal injury,
•
Only qualified personnel shall perform inspections to this Hendrickson Front Suspension
Bushing Tool.
•
Before each use, an approved inspector must inspect the suspension bushing tool for bends,
cracks, dents, elongated holes, or missing hardware. If damage is found, discontinue use.
•
Use only those repair parts called out in the parts list in this document. Items found in the parts
list have been carefully tested and selected by OTC.
Maintenance
To prevent contamination from entering the hydraulic system and damaging the cylinder, keep the cylinder
clean. When the cylinder is not in use, keep the piston rod fully retracted and stored upside down. Use
protective covers on disconnected quick couplers.
Disposal
At the end of its useful life, dispose of the suspension bushing tool according to federal, state, and local
regulations.
8
Inspection and Maintenance
Order replacement parts
at OTCparts.com
This document contains product parts lists and information regarding
operation and maintenance. Items listed in the parts list have been carefully
tested and selected by OTC. Therefore, use only OTC replacement parts.
Product questions may be directed to the OTC Technical Service Department
at (800) 533-6127.
Advertisement
Table of Contents
