Denial Of Service (Dos); Allow/Deny Multicast Streaming - TRENDnet TEW-831DR User Manual

Ac1200 dual band wifi router

Table of Contents

TRENDnet User's Guide

Denial of Service (DoS)

Advanced > Firewall > DoS

The router supports prevention against common denial of service attacks. Malicious

users use denial of service attacks to temporarily or permanently disrupt the availability

of services from a network resource such as your router. Typically, DoS attacks are

achieved by flooding a specific network resource excess and unnecessary requests

which results in the network resource to stop responding or process requests much

slower compared to normal operation due to the excessive and unnecessary requests

received by the DoS attack.

1. Log into your router management page (see

on page 10).

2. Click on Advanced, click on Firewall, and click then click DoS.

3. Click the DoS Settings drop-down list to select Enable to enable DoS prevention.

4. To save changes to this section, click Save when finished. Commit your changes to the

router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply &

Reboot.

"Access your router management

page"

Advanced > Wireless (2.4GHz or 5GHz)

In some cases, applications require multicast communication (also called IP multicast

which is the delivery of information to a specific group of computers or devices in a

single transmission) typically used in media streaming applications.

1. Log into your router management page (see

on page 10).

2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then and click on

Advanced.