Table of Contents
Advertisement
Section 4 - Configuration
If Smart Connect is disabled the following options are available:
2.4GHz / 5GHz
Status:
Enable or disable the 2.4 GHz / 5 GHz wireless network.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security.
Advanced Settings
Security Mode:
Choose None or WPA/WPA2-Personal (recommended).
802.11 Mode
Select the desired wireless networking standards to use.
(2.4 GHz):
The available options for the 2.4 GHz wireless network are Mixed
802.11b/g/n, Mixed 802.11g/n, 802.11n only.
802.11 Mode
Select the desired wireless networking standards to use.
The available options for the 5 GHz wireless network are Mixed
(5 GHz):
802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n,
Mixed 802.11n only, or 802.11a only.
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel:
Transmission
Select the desired wireless transmission power.
Power:
Channel Width
Select Auto 20/40 if you are using both 802.11n and non-802.11n
(2.4 GHz):
devices, or select 20 MHz if you are not using any 802.11n devices.
Channel Width
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a
(5 GHz):
devices, select Auto 20/40 if you are using 802.11n and 802.11a
devices, or select 20 MHz if you are only using 802.11a devices.
D-Link DIR-1935 User Manual
Wireless - Smart Connect Disabled
59
Advertisement
Table of Contents
