5C
5E
STEP 6:
Connect the stack to the purge valve through the filter for a longer running time and a better
performance (6A-6D). If not, the gas out of stack may have a negative effect on the purge valve
after a long time running. Connect the output of the purge valve to a place away from the stack in
case of the damage caused by the hydrogen leakage.
6A
Manual_FCS-C500_V1.1_EN
5D
Warning:The tube between the
hydrogen pressure regulator and
the fuel cell gas input is required to
be less than 30cm.
6B
16