5.SAS BIOS
The SAS Configuration Utility is used for setting this product. To start the utility, no special startup
disk is required. It can be started by a simple keyboard operation while the self-diagnosis program
POST is running. In normal operation, change the setting of the SAS Configuration is not necessary
because this product's configuration is optimized at factory shipment.
5-1.Starting LSI Corp Config Utility
Follow these steps to start LSI Corp Config Utility.
1.
Turn on the server.
The following message will be displayed.
2.
Hold <Ctrl> key and press <C> key.
SAS Configuration Utility starts and the "Adapter List" menu will be displayed.
- LSI Corp Config Utility -
This product is delivered with the latest version of the LSI Corp Config Utility.
Therefore, the settings windows may be different from those in this document. In
such a case, contact your sales agent for details.