TRENDnet TE100-SK1plus Features
TRENDnet TE100-SK1plus Features

TRENDnet TE100-SK1plus Features

100mbps fast ethernet starter kit

Advertisement

TE100-SK1
FEATURES

SOFTWARE SUPPORT

plus
10/100Mbps PCI Fast Ethernet Card
Realtec RTL8139 based chipset
10/100Mbps auto-sensing
Supports half- and full-duplex operation
Single UTP/STP RJ-45 connector (CAT 3, 4, 5 UTP/STP cables for 10Mbps operation
and CAT 5 UTP/STP cable for 100Mbps operation)
32-bit PCI Bus master mode
Plug and Play (PnP)
Compatible with all popular network operating systems
5-years warranty
5-port 100Base-TX Fast Ethernet Hub
Supports five 100Base-TX UTP/STP RJ-45 ports per hub
MDI-II uplink port (shared with port 1) allows connection to another 100Base-TX
Class II hub/switch without using the crossover cable
Connects with UTP/STP Category 5 cables
Status LED indicators for easy viewing and troubleshooting
Auto-partitioning function isolates network failure
Sturdy all metal housing
5-years warranty
Windows NT
Windows 95/98/98Me/2000
Windows for Workgroups 3.11
Novell NetWare
LAN Manager
IBM LAN Server
IBM LAN Support
IBM TCP/IP
TRENDnet's 100Mbps
Fast Ethernet Starter Kit
TRENDnet's TE100-SK1plus 100Mbps Fast Ethernet
Starter Kit is a complete networking solution for connect-
ing two personal computers to share files, printers, hard
drives, and other peripherals. The kit comes with two
10/100Mbps PCI cards, a 5-port 100Base-TX hub, two 20
feet CAT 5 cables, and an easy-to-use installation guide.
Designed especially for home and small office use, this
reliable kit lets you cruise in 100Mbps speed and allows
expansion of your future networks.
NDIS Driver
DEC PATHWORKS
Banyan
SCO UNIX
Packet Driver
FTP PC/TCP
NCSA TCP/IP
LINUX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TE100-SK1plus and is the answer not in the manual?

Questions and answers

Summary of Contents for TRENDnet TE100-SK1plus

  • Page 1 IBM TCP/IP TRENDnet’s 100Mbps Fast Ethernet Starter Kit TRENDnet’s TE100-SK1plus 100Mbps Fast Ethernet Starter Kit is a complete networking solution for connect- ing two personal computers to share files, printers, hard drives, and other peripherals. The kit comes with two 10/100Mbps PCI cards, a 5-port 100Base-TX hub, two 20 feet CAT 5 cables, and an easy-to-use installation guide.
  • Page 2 Add a server or workstation, Internet station, and network printer without changing the hub. Flexible: Hub is small enough to be installed anywhere it is needed. Cost Effective: With lifetime warranty, purchase only the parts you need. Network Solution for TE100-SK1plus TE100-SK1plus PRODUCT TE-SK1 plus INFORMATION...

Table of Contents