Table of Contents
Advertisement
Installation
Selecting a Site for the Switch
As with any electronic device, do not subject the Ethernet
switch to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you
select should meet the following requirements:
•
Room temperature of between 0-40°C (32-
104°F)
•
Relative humidity of less than 90 percent,
non-condensing.
•
Electromagnetic field (RFC) of surrounding
devices not to exceed standards for IEC
801-3, Level 2 (3V/M) field strength.
•
Adequate ventilation. Do not block the
ventilation holes on the side of the switch or
the fan exhaust port on the rear of the switch.
•
Power outlet located within 1.8Meter of the
switch.
User's Manual
9
Advertisement
Table of Contents
