Optoma x354 User Manual page 35

UsInG THE PRoJECToR
Color settings
Configure the color settings.
‡ brilliantColor
enable higher brightness while providing true, more vibrant colors in picture.
‡ Color Temperature (data-mode only)
‡ Color matching
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Hue: Adjust the color balance of red and green.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
‡ RGb Gain/biase:
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
‡ Color space (non-HDmI input only)
AUTO, RGB, or YUV.
‡ Color space (HDmI input only)
RGB(0-255), RGB(16-235), and YUV.
‡ RGb Channele:
‡ White levele:
‡ black levele:
‡ saturatione:
‡ Huee: Adjust the color balance of red and green.
‡ IREe: Allow user to adjust IRE value when inputting Video signals.
notee: IRE is only available with NTSC video format.
‡ Exit : Exit the "Color Settings" menu.
signal
Adjust the signal options.
‡ automatic : Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
‡ frequency : Change the display data frequency to match the frequency of your computer's graphic
card. Use this function only if the image appears to flicker vertically.
‡ Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
‡ H. Position : Adjust the horizontal positioning of the image.
‡ V. Position : Adjust the vertical positioning of the image.
‡ Exit : Exit the "Signal" menu.
: This adjustable item utilizes a new color-processing algorithm and enhancements to
Tm
: Select the following options:
This settings allows to configure the brightness (gain) and contrast (bias) of an
: Select an appropriate color matrix type from the following:
: select an appropriate color matrix type from the following: Auto,
Select from normal, red, green, or blue channels.
Allow user to adjust White Level when inputting Video signals.
Allow user to adjust Black Level when inputting Video signals.
Adjust a video image from black and white to fully saturated color.
: Select a color temperature from Warm, Medium, or Cool.
35
English