Advertisement
3
WORK
3.1
Removing the passenger seat
3.2
Mounting the passenger seat
3.3
Removing the driver's seat
3.4
Mounting the driver's seat
–
Insert the ignition key in seat lock
–
Raise the front of the passenger seat, pull it toward the tank, and remove it
upward.
–
Remove the ignition key.
G00574-10
–
Attach the hooks on the passenger seat to the brackets on the subframe, and lower
at the front while pushing toward the rear.
–
Insert locking pin
ger seat until the locking pin engages with a click.
–
Check that the passenger seat is correctly mounted.
401680-10
Preparatory work
–
Remove the passenger seat. (
Main work
–
Raise the rear of the driver's seat.
–
Detach the front of the driver's seat and remove it.
G00575-10
Main work
–
Attach the recesses on the driver's seat to the fuel tank at the desired seat posi-
tion
or
–
Finally, check that the driver's seat is correctly mounted.
401704-10
Finishing work
–
Mount the passenger seat. (
into the lock housing and push down the front of the passen-
p. 6)
, and push the driver's seat forward while lowering it at the rear.
p. 6)
and turn it clockwise.
6
Advertisement
