Table of Contents
Advertisement
Broadband Router User Guide
This is not required for PPPoE or SingTel RAS.
Server Address
For PPTP, L2TP and BPA, enter the Server address as provided by
your ISP.
Connection
Select the desired option:
Behavior
•
•
•
Auto-disconnect
Idle Time-out
Buttons
Inserts the default MAC address into the MAC address field. You
Default
must click "Save" to actually change the address used.
Copy from PC
Inserts the MAC address from your PC into the MAC address field.
You must click "Save" to actually change the address used.
Save
Save your changes to the Broadband Router.
Cancel
Reverse any changes made since the last "Save".
Chapter 7
Advanced Administration
This Chapter explains the settings available via the "Administration" section of the menu.
Overview
Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-
standard situations, or to provide additional options for advanced users.
The available settings and features are:
Config File
Backup or restore the configuration file for the Broadband Router This
file contains all the configuration data.
View or clear all logs, set E-Mailing of log files.
Logs
Automatic Connect/Disconnect
An Internet connection is automatically made when required,
and disconnected when idle for the time period specified by the
"Auto-disconnect Idle Time-out".
Manual Connect/Disconnect
You must manually establish and terminate the connection.
Keep alive (maintain connection)
The connection will never be disconnected by this device. If dis-
connected by your ISP, the connection will be re-established
immediately. (However, this does not ensure that your Internet
IP address will remain unchanged.)
This field has no effect unless using the Automatic Con-
nect/Disconnect setting.
If using this setting, enter the desired idle time-out period (in mi-
nutes). After the connection to your ISP has been idle for this
time period, the connection will be terminated.
7
64
Advertisement
Table of Contents
