Loading The Ribbon - Gainscha GI-6404T Series User Manual

3.3 Loading the Ribbon

3.3.1 Loading the Ribbon
1. Lift the printer cover handle, and install the
ribbon and empty ribbon roll on the ribbon
supply spindle and ribbon rewind spindle,
respectively.
3. Pull the Print head release lever to open print
head mechanism.
5. Fix the smooth and wrinkled front end of the
ribbon on the empty ribbon roll.
2. Pull the movable offsets of the ribbon supply
spindle and ribbon rewind spindle.
4. Thread ribbon below the ribbon guide bar
through ribbon sensor slot. ( See the "Ribbon
Loading Path" illustration below).
6. Wind the ribbon rewind spindle clockwise
roughly 3~5 circles until the ribbon is smooth,
properly stretched and wrinkle-free.
23