Loading The Ribbon - Gainscha GX-2408T Series User Manual

3.3 Loading the Ribbon

1.
Insert the ribbon shaft into a new ribbon.
3.
Press the button to open the ribbon
holder.
5.
Load the left side of ribbon shaft first, then
the right side.
7.
Put the ribbon holder back.
2.
Load the left side of ribbon shaft first, then
the right side.
4.
Insert the ribbon shaft into the empty
ribbon core.
6. Pull out the ribbon and stick it on the
empty roll. Rotate it until the black area
covers the print head smoothly.
8.
Close the top cover of the printer carefully.
Press the cover until it clicks.
16