ResMed AirFit F20 Manual page 14

STEP 7
Connecting
your mask to
your machine
With the mask on your face,
A
connect the tube from your machine
to the mask.
On the Home screen, turn the dial
B
to My Options and press the dial
Home
to confirm your choice.
Scroll down to the Run Mask Fit
C
My Options
option and press the dial. The machine
will start blowing air, and a green
happy face will automatically appear on
Sleep Report
the screen. Wait at least 10 seconds to
ensure the screen does not change;
a happy face indicates that your mask
is fitted properly.
12 ResMed equipment start guide
A
C
My Options
Home
Ramp Time Auto
Humidity Level 4
Mask Full Face
Run Mask Fit
Run Warmup
Airplane Mode O
B
Home
My Options
Sleep Report
My Options
Mask Fit
Good
Stop Mask Fit
My Options
Mask Fit