global_main.book.book Page 24 Tuesday, August 31, 2021 2:29 PM
MAINTENANCE
24
Cleaning the Nozzles
Clean the nozzle and rotating brush regularly.
CAUTION
• Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
• Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
• Do not use the rotating brush as a wet mop. It
may cause product damage.
• Do not rinse or submerge the rotating brush or
nozzle in water. It may cause product damage.
Cleaning the Multi-Surface
Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1
Press the nozzle release button
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and rotate the
cover lock slot
counterclockwise.
b
3
Pull the brush cover forward and pull the brush
out.
4
Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and
dust from the brush and the bottom of the
nozzle.
5
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Carefully use a tweezers to remove foreign
objects from all of the nozzle rollers.
• Do not rinse or submerge the rotating brush
to remove
a
or nozzle in water.
6
Slide the brush back into the nozzle and rotate
the cover back into place. Turn the cover lock
clockwise to lock the cover.