o You can [Start now] to start to connect to
the network or [Cancel] to exit back to TV
last status.
o You can [Connect] to make the connection
or [Cancel] to exit back to TV last status
o While 'Connect' is selected you will go to
the next screen where you will see a
message that the router is contentiously
scanned until a network connection is
found
o Once a network is connected you will see
a screen that the TV is successfully
connected
Note: In case the connection fails
you need to check the network
cable and your network settings
in the network itself.
The yellow RJ48 Serial Xpress
connector on the back side of TV is
not the network connector
- 72 -