Software Upgrade - Philips 32HFL4014 Professional Installation Manual

2.3 Software upgrade

For the best guest experience, it is highly recommended to use the latest software version available.
Go to: http://www.philips.com/support/

Select your country, enter the model number and download the latest software version
available

Unzip the software and follow the instructions how to upgrade the software on the TV

The USB flash drive used for software upgrade must be formatted as FAT32 and preferably
empty to avoid an accidental upload of a wrong setting or software

Preparation:
o Copy the software (Autorun.upg) on the root of the USB stick (FA32 formatted) and
do not change the name

Procedure:
o Start up the TV and wait until it is fully booted up, should take a max of 2min
o Insert the USB stick
o A wizard will automatically appear and start the upgrade to the new SW
o Wait until the process finishes and do not unplug the power cord
o After around 2min the update will be done and the USB stick can be extracted

It's required to first upgrade the TV and afterwards to perform the installation
The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action:
software upgrade and cloning during the instant initial cloning. See chapter 'Instant Initial Cloning (IIC)'
for more information.
- 12 -