Network Control Tv Over Ip - Philips 32HFL4014 Professional Installation Manual

6.12.3

Network Control TV Over IP

o Navigate to the [Show Network Lost
Message] menu
o You will see below items:
o [No]: Disable to show a message when
the network connection is lost
o [Yes]: Enable to show a message when
the network connection is lost
o Navigate to the [Networks] [Control TV Over
IP] menu
o You will see the screen on the left
o Navigate to the [Networks] [Control TV Over
IP] [Webservices] menu
o Web Services is a mechanism to exchange
information from the TV to the server. The TV
will send below services to the server on a
periodically
o You will see below items:
o [Server URL]: This is the URL where the
Web Services server can be found. This
server will host the pages
By default this URL is:
http://SmartInstall.org:8080/webservices
.jsp
To get your TV's detected in
CMND you need to change
'SmartInstall.org'
address of your CMND server. For
example:
http://1.2.3.4:8080/webservices.jsp
o [TVDiscoveryService]:
Service is the Web Service through which
a Web Server will detect the presence of
TVs in the IP Network using the TV Serial
Number and Production code (and other
data). You can put this option [Off] or [On]
o [ProfessionalSettingsService]:
Professional Settings Services allows
changing or requesting the current
Professional Settings Parameters. You can
put this option [Off] or [On]
o [IPUpgradeService]:
cloning and software update of the TV
over IP via CMND, this can be put [Off] or
[On]
o [SystemStatusService]: This will allow
providing the Status of the TV and other
- 44 -
to the IP
TV Discovery
This will allow