Toro 58603 Operator's Manual page 25

3. Gently rotate the transmission pulley and force
the forward drive belt into the groove.
Figure 40
4. Slide the reverse drive belt onto the reverse arm
idler pulley, between the wire belt guides, and
into the groove.
Figure 41
1. Reverse arm
2. Idler pulley
5. Tighten the idler pulley so that the wire belt
guides do not contact the belt when the reverse
drive lever is engaged.
6. Connect the forward and reverse drive cables to
the drive control levers.
g356685
g356686
3. Wire belt guide
4. Reverse drive belt
7. Install the upper shrouds and lower pulley
guards.
8. Install the wheels.
9. Install the spark plug wire.
25
Figure 42
g357906