Servicing The Engine Oil - Toro 58603 Operator's Manual

Installing the Air Cleaner Elements
1. Install the foam pre-cleaner element over the
paper element.
Note:
Ensure that you do not damage the
elements.
2. Install the air-cleaner elements onto the
air-cleaner base and onto the stud.
3. Secure the elements using the fastener.
4. Install the cover and secure it with the fastener.
Figure 25
1. Cover
2. Fastener
3. Pre-cleaner
g359988
4. Paper element
5. Stud
6. Air-cleaner base

Servicing the Engine Oil

Engine-Oil Specifications
Engine oil capacity
Oil viscosity
API service classification
Checking the Engine-Oil Level
Service Interval: Before each use or daily
1. Move the machine to a level surface.
2. Remove the dipstick and wipe the end clean.
1. Filler tube
2. Dipstick
3. Insert the dipstick fully into the oil-fill tube, but
do not turn or tighten it.
20
0.54 to 0.59 L (18 to 20 fl oz)
Refer to the chart below.
SJ or higher
Figure 26
Figure 27
3. Upper limit
4. Lower limit
g359987
g360042