Table of Contents
Advertisement
6-3 Extended Menu
Item number Item name
301
VAR SPEED RANGE FOR
SYNCHRONIZATION
302
CAPSTAN RE-LOCKING
DIRECTION
306
DMC INITIAL SPEED
307
AUTO-DELETION FOR
INCONSISTENT DATA
320
DIGITAL AUDIO
PROCESS ON EDIT
POINT
6-12
Chapter 6 Menu System
Menu items in the 300s, relating to editing operations
Settings
Select the playback speed range when carrying out playback in variable mode
from a remote control unit connected to the REMOTE-1 IN (9P) connector or
REMOTE-1 OUT (9P) connector.
–1~+2 : –1 to +2 times normal speed.
~+2.3 : –1.5 to +2.3 times normal speed.
wide : Undefined.
In 525 mode
When the CAPSTAN LOCK switch on the subsidiary control panel is set to 4FD
select whether the capstan servo should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL: Lock by accelerating.
In 625 mode
When the CAPSTAN LOCK switch on the subsidiary control panel is set to 4FD
or 8FD select whether the capstan servo should lock by accelerating or
decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
Select the initial speed automatically set when carrying out DMC playback.
MANUAL : The speed determined by the rotation of the search dial.
PLAY: Normal playback speed.
STILL: Stationary.
±0.03~±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5, ±0.2,
±0.1, ±0.03).
Select what happens when an erroneous DMC playback control point is set.
MANU : A warning is given by flashing the DELETE button on the lower control
panel.
The operator must manually delete the unnecessary DMC playback control
points or correct the erroneous DMC playback control point.
NEG&E: When inconsistent DMC playback control points are set, such as a
speed variation end point is before a speed variation start point, or an on-air
end point is before an on-air start point, or when too many DMC playback
control points are specified, the previously set DMC playback control point is
deleted.
NEG: When inconsistent DMC playback control points are set, such as a speed
variation end point is before a speed variation start point, or an on-air end point
is before an on-air start point, the previously set DMC playback control point is
deleted. When too many DMC playback control points are specified, the
DELETE button on the control panel flashes to give a warning.
Note
Pressing the button corresponding to a DMC playback control point to be deleted
and the DELETE button simultaneously, deletes the DMC playback control point.
If an erroneous DMC playback control point is set (the DELETE button is
flashing), DMC playback is not executed.
Select the treatment of audio at edit points.
CUT: Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE : Fade out and fade in.
Advertisement
Table of Contents
