Table of Contents
Advertisement
You can also use the following procedure.
1
With the shot mark list displayed, hold down the
STOP button, and press the SET button.
You can now select the shot mark types.
2
Turn the search dial to select a shot mark type.
3
Hold down the JOG button and turn the search dial
to switch between ON (displayed) and OFF (not
displayed).
4
To return to the shot mark list, hold down the
STOP button, and press the SET button.
Deleting a shot mark from the list
To delete an individual shot mark
Use the following procedure.
6
0
3
2
1
In the shot mark list, select the shot mark to be
deleted.
2
Hold the MARK button down.
While you hold down the button, an "X" appears
after the selected shot mark number, indicating that
it will be deleted.
To delete more than one shot mark, while holding
down the MARK button turn the search dial to
select all of the shot marks.
3
With the MARK button held down, press the
DELETE button.
This deletes the shot marks which were marked by
an "X".
%
9
)
p
2
1
To delete the entire list
Hold down the DELETE button and press the LIST
button.
This deletes all shot marks from the list. This does not
erase marks from the tape.
Erasing shot marks from the tape
To erase a shot mark, use the following procedure.
Note
Once you erase a shot mark from the tape, it cannot be
read back in.
1
With no shot mark list displayed, hold the MARK
button down for at least 2 seconds.
The REC/ERASE indicator lights green, indicating
that you can rewrite or erase shot marks.
2
Display the shot mark list.
3
Turn the search dial to select on the list the shot
mark you wish to erase.
4
Press the DELETE button and MARK button
simultaneously.
During the erasure process the message "ERASE
SHOT MARK" appears, and the REC/ERASE
indicator lights red.
5
When the erasing operation is completed, hold
down the MARK button for at least 2 seconds, to
turn off the REC/ERASE indicator.
Chapter 5 Shot Mark Function
5-5
Advertisement
Table of Contents
