Table of Contents
Advertisement
1-1 Features
Menu-based setup
Initial settings for the unit's operating condition, the
interfaces with connected equipment, and so forth can
be made by menu operations on the front panel of the
unit.
Wide range of indications
In addition to the LED display which shows the
operating status and current settings of this unit and
connected equipment, a fluorescent display displays
numerical values including time code, user bits, DMC
playback IN and OUT points, DMC playback
durations, error messages and setup menu information.
Incorporation of a time code generator
Playback time code can be output as it is or after
regeneration by a built-in time code generator.
1-2
Chapter 1 Overview
Connection to external control devices
It is possible to connect a BVE-900/910/2000/9000/
9000P/9100/9100P or other BVE-series editor, a
control and monitoring computer, a BVR-50/50P
remote controller for the built-in digital video
processor, and so forth.
Economy
• You can use a variety of tapes, including low-priced
tapes for UVW-series VTRs and tapes for Betacam
SP or Betacam SX format.
• The design needs minimal maintenance, and requires
no daily maintenance or checks. The drum and other
components have reduced maintenance costs.
Rack mounting
The unit can be mounted in an EIA standard 19-inch
rack.
For details of rack mounting, refer to the Installation
Manual.
Advertisement
Table of Contents
