Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TP-Link TG-3468
Summary of Contents for TP-Link TG-3468
- Page 1 TG-3468 10/100/1000Mbps PCI-E Gigabit Network Adapter REV: 1.0.0 1910010023...
- Page 2 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLO- GIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transforma- tion, or adaptation without permission from TP-LINK TECHNOLOGIES...
-
Page 3: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. -
Page 4: Ce Mark Warning
Package Contents The following items should be found in your package: One TG-3468 10/100/1000Mbps PCI-E Gigabit Network Adapter One Resource CD for TG-3468，including: • Drivers •... -
Page 5: Table Of Contents
Chapter 1 Introduction... 1 Overview of the Product ... 1 Features ... 1 LED Status ... 2 Chapter 2 Installation Guide... 3 Hardware Installation... 3 Adapter Driver Installation ... 3 Chapter 3 Connection to the Network ... 4 Transmission Distance ... 4 Cable Category and Line Sequence ... -
Page 6: Chapter 1 Introduction
IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications. TG-3468 keeps low cost and eliminates usage barriers. It is the easiest way to upgrade a network from 10/100Mbps to 1000 Mbps. It supports 10/100Mbps network speed automatically both in Half-Duplex and Full-Duplex transfer modes, and 1000Mbps in Full-Duplex transfer mode，using Auto-Negotiation technology to... -
Page 7: Led Status
There are four LEDs, including a 10Mbps Link/Act LED, a 100Mbps Link/Act LED, a 1000Mbps Link/Act LED and a Full Duplex Mode LED. The Link/Act LEDs of TG-3468 PCI-E 10/100/1000M LAN Card indicates Link/Act status. They will light when connection has been built, and glitter when the adapter transmits or receives data. -
Page 8: Chapter 2 Installation Guide
Plug in the power cord and other cables, and then turn on your computer. 2.2 Adapter Driver Installation For Windows Operating System, please insert the TG-3468 CD into your CD or DVD driver. Then complete the driver installation according to the cue on the screen. -
Page 9: Chapter 3 Connection To The Network
Chapter 3 Connection to the Network 3.1 Transmission Distance When this device was connected with the other devices which are also compatible with IEEE802.3, the connection distance is up to 100 meters. 3.2 Cable Category and Line Sequence The transmission speed of this device can reach to 10Mbps with Category 3/4/5 cable. -
Page 10: Appendix A: Specifications
Appendix A: Specifications Interface Support PCI Express 1.0a Buffer Size Transmit/Receive On Chip Buffer(48K)support IEEE802.3ab Standards 1000Base-T,IEEE802.3x,IEEE802.3q,IEEE802.3p Transmission 10/100Mbps(Half-Duplex) Rate 20/200/2000Mbps( Full-Duplex) Connector one 10/100/1000M Auto-Negotiation RJ45 port Driver Windows 98se/Me/2000/XP/XP64, Support Linux,Vista32/64 a 10M Link/Act LED, a 100M Link/Act LED, a LEDs 1000M Link/Act LED and a Full Duplex Mode LED Safety... -
Page 11: Appendix B: Troubleshooting
Appendix B: Troubleshooting 1. PC cannot find the new hardware. Suggestion: Check to see if the network adapter is inserted in the PCI Express slot properly and reinsert the adapter. If the problem remained, please try to change another PCI Express slot. 2.