ELAC SUB1020 Operating Instructions Manual page 3

4. Overload
Extreme overload of the device due to very high volume may cause damage to individual components
Because of the possible danger, you should never leave loudspeakers under extreme overload conditions
unattended.
5. Service
DANGER! Do not open the cabinet because of potentially hazardous voltages exist inside! Servicing to be
carried out by qualified service personnel only.
Servicing is required when the loudspeaker has been damaged in any way, such as damage to the power
supply cord or the plug, or when liquid has been spilled or objects have fallen into the loudspeaker, the
speaker has been exposed to rain or moisture, does not operate normally, or has been dropped. To reduce
the risk of electric shock, do not open the loudspeaker. Servicing to be carried out by qualified service
personnel only.
6. Fuse links
Various faults in subwoofers or active speakers may cause the fuse to blow. If the fuse blows, only replace it
with the correct fuse type and rating as shown on the rear of the loudspeaker on the fuse holder.
7. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol, benzene,
furniture polish or other agents for cleaning! Modern furniture is often coated with multiple varnishes and
plastics which can be treated with chemical agents. Some of these agents contain substances which
degrade or soften the rubber feet. Therefore we advise you to place an anti-slip mat underneath the
loudspeaker.
8. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
9. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner. At
end of life do not dispose the speaker with the standard household waste. The speaker must be recycled in
accordance with local legislation. Ask your local government for further information on recycling as the
device contains valuable raw materials. Disable the speaker before disposal.
10. Power
This subwoofer is only intended to be connected to voltages that are listed on the rear panel of the cabinet
Connection to any other voltage may cause irreversible damage to the subwoofer and will void the warranty.
Use of plug adapters is not recommended because they may allow connection to voltages other than those
printed on the back of this subwoofer.
ELAC SUB1020 Subwoofer | www.elac.com | Page 2