1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. TL-MR3220
  6. User manual

TP-Link TL-MR3220 User Manual

3g/3.75g wireless lite n router
Hide thumbs
Table of Contents

Advertisement

Quick Links

TL-MR3220
3G/3.75G Wireless Lite N Router
Rev: 1.0.0
1910010350

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TL-MR3220

Summary of Contents for TP-Link TL-MR3220

  • Page 1 TL-MR3220 3G/3.75G Wireless Lite N Router Rev: 1.0.0 1910010350...

  • Page 2: Fcc Statement

    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Ce Mark Warning

    FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.

  • Page 4: Declaration Of Conformity

    DECLARATION OF CONFORMITY For the following equipment: Product Description: 3G/3.75G Wireless Lite N Router Model No.: TL-MR3220 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...

  • Page 5: Table Of Contents

    Package Contents ... 1 Chapter 1. Introduction... 2 Overview of the Router... 2 Conventions ... 2 Main Features ... 3 Panel Layout ... 3 1.4.1 The Front Panel ... 3 1.4.2 The Rear Panel ... 4 Chapter 2. Connecting the Router ... 6 System Requirements ...
  • Page 6 4.7.2 DHCP Clients List ... 58 4.7.3 Address Reservation ... 58 Forwarding ... 60 4.8.1 Virtual Servers ... 60 4.8.2 Port Triggering ... 62 4.8.3 DMZ... 64 4.8.4 UPnP ... 64 Security ... 65 4.9.1 Basic Security... 66 4.9.2 Advanced Security... 67 4.9.3 Local Management ...
  • Page 7 4.16.8 System Log... 98 4.16.9 Statistics ... 100 Appendix A: FAQ ... 102 Appendix B: Configuring the PCs... 107 Appendix C: Specifications ...111 Appendix D: Glossary...112 Appendix E: Compatible 3G/3.75G USB Modem ...114...

  • Page 8: Package Contents

    Package Contents The following items should be found in your package: TL-MR3220 3G/3.75G Wireless Lite N Router DC Power Adapter for TL-MR3220 3G/3.75G Wireless Lite N Router Quick Installation Guide Resource CD for TL-MR3220 3G/3.75G Wireless Lite N Router, including: •...

  • Page 9: Chapter 1. Introduction

    3G/WAN Broadband Connection The TL-MR3220 3G/3.75G Wireless Lite N Router provides 3G and WAN (xDSL, static IP, or dynamic IP) two kinds of broadband connections to get on the Internet, you can via the Internet no matter in home or outside on business. Automatic 3G/WAN failover feature just provide...

  • Page 10: Main Features

    Connects Internet on demand and disconnects from the Internet when idle for PPPoE Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access Control List) Supports Flow Statistics Supports firmware upgrade and Web management Panel Layout 1.4.1 The Front Panel TL-MR3220 3G/3.75G Wireless Lite N Router Figure 1-1 Front Panel sketch...

  • Page 11: The Rear Panel

    POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-MR3220 3G/3.75G Wireless Lite N Router. WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s) USB: Connect to the USB Modem.
  • Page 12 Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings. Wireless antenna: To receive and transmit the wireless data. TL-MR3220 3G/3.75G Wireless Lite N Router...

  • Page 13: Chapter 2. Connecting The Router

    Connect the DSL/Cable Modem to the WAN port of the 3G Router, shown in Figure 2-1. Please visit our website http://www.tp-link.com to get the latest USB modems compatibility, and we recommend you to check whether the modem in your hand has already been TL-MR3220 (32 ~104 ) ℃...
  • Page 14 Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router will start to work automatically. Power on your PC and Cable/DSL Modem. Figure 2-1 Hardware Installation of the 3G/3.75G Wireless Lite N Router TL-MR3220 3G/3.75G Wireless Lite N Router...

  • Page 15: Tcp/Ip Configuration

    Open a command prompt, and type ping 192.168.1.1, and then press Enter. If the result displayed is similar to the Figure 3-1, it means the connection between your PC and the Router has been established well. TL-MR3220 3G/3.75G Wireless Lite N Router Appendix B:...
  • Page 16 Please check the connection following these steps: Is the connection between your PC and the Router correct? Note: The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter should be lit. TL-MR3220 3G/3.75G Wireless Lite N Router...
  • Page 17 Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. After successfully login, you can click the Quick Setup to quickly configure your Router. TL-MR3220 3G/3.75G Wireless Lite N Router ®...
  • Page 18 In this mode, the router will try WAN access first. If the WAN access fails, and 3G access is valid, the router would switch to 3G access. Once the router succeeds to connect to the TL-MR3220 3G/3.75G Wireless Lite N Router...
  • Page 19 You will then see Figure 3-8. Select Auto-Detect, the Router will automatically detect the connection type your ISP provides. Make sure the cable is securely plugged into the WAN port before detection. The appropriate configuration page will be displayed when an active TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-7...
  • Page 20 TL-MR3220 3G/3.75G Wireless Lite N Router Internet service is successfully detected by the Router. Figure 3-8 If the connection type detected is PPPoE, the next screen will appear as shown in Figure 3-9. Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP.
  • Page 21 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-10 Quick Setup - Static IP Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11. Figure 3-11 Quick Setup – Wireless Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.
  • Page 22 Click the Next button. You will then see the Finish page. If you don’t make any changes on the Wireless page, you will see the Finish page as shown in Figure 3-12. Click the Finish button to finish the Quick Setup. TL-MR3220 3G/3.75G Wireless Lite N Router -15-...
  • Page 23 After the rebooting, please check whether you can access the Internet or not in the page. Note: The configuration for 3G Only, WAN Preferred and WAN Only mode is very similar to 3G Preferred mode. Here we just take 3G Preferred for example. TL-MR3220 3G/3.75G Wireless Lite N Router -16- 4.2 Status...

  • Page 24: Chapter 4. Configuring The Router

    On the right, there are the corresponding explanations and instructions. The detailed explanations for each Web page’s key function are listed below. Status The Status page provides the current status information about the Router. All information is read-only. TL-MR3220 3G/3.75G Wireless Lite N Router -17-...
  • Page 25 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-1 Router Status -18-...

  • Page 26: Quick Setup

    For the configuration of the new device, here takes the Wireless Adapter of our company for example. By PBC If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-2 QSS -19-...
  • Page 27 TL-MR3220 3G/3.75G Wireless Lite N Router method, you can add it to the network by PBC with the following two methods. Method One: Step 1: Press the QSS button on the front panel of the Router. Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
  • Page 28 The QSS Configuration Screen of Wireless Adapter Method Three: Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2 , then the following screen will appear. TL-MR3220 3G/3.75G Wireless Lite N Router -21-...
  • Page 29 QSS as below, and click Next. The QSS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-3 Add A New Device -22-...

  • Page 30: By Pin

    Step 3: For the configuration of the wireless adapter, please choose Enter a PIN into my access point or a registrar in the configuration utility of the QSS as below, and click Next. TL-MR3220 3G/3.75G Wireless Lite N Router -23-...
  • Page 31 QSS as below, and enter the PIN code of the Router into the field behind Access Point PIN. Then click Next. The QSS Configuration Screen of Wireless Adapter TL-MR3220 3G/3.75G Wireless Lite N Router -24-...

  • Page 32: Network

    Choose menu “Network→Internet Access”, you can configure the access mode on the screen below. The router is designed to work with either WAN port or 3G USB modem, and supports automatically take over back up with 3G access as Ethernet WAN failover. TL-MR3220 3G/3.75G Wireless Lite N Router -25-...
  • Page 33 3) If you are using the 3G Preferred or WAN Preferred, the router would connect, disconnect or switch the current access automatically. The Connect/Disconnect button (on 3G, PPPoE, PPTP, L2TP) and some related parameters could not be set manually. TL-MR3220 3G/3.75G Wireless Lite N Router -26-...
  • Page 34 TL-MR3220 3G/3.75G Wireless Lite N Router 4.5.2 3G Choose menu “Network→3G”, you can configure parameters for 3G function on the screen below. To use the 3G function, you should first insert your USB modem on the USB port of the Router.
  • Page 35 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-6 3G Figure 4-7 Location - Please select the location where you're enjoying the 3G card. Mobile ISP - Please select the ISP (Internet Service Provider) you apply to for 3G service. The router will show the default Dial Number and APN of that ISP.
  • Page 36 Click the Connect button to connect to your 3G network. Once the connection is successful, you will find the 3G screen is similar to Figure 4-8. Click menu Status and you will see the 3G status is similar to Figure 4-9. TL-MR3220 3G/3.75G Wireless Lite N Router -29-...
  • Page 37 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-8 -30-...
  • Page 38 Note: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications visit the Internet continually in the background. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-9 -31-...
  • Page 39 2. Click the Add New... button in Figure 4-10, and then you will see Figure 4-11. 3. Click Browse… to select the path name where you save the downloaded file on the computer into the File blank. TL-MR3220 3G/3.75G Wireless Lite N Router -32-...

  • Page 40: Wan

    If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 4-12): TL-MR3220 3G/3.75G Wireless Lite N Router if you want to use WAN.
  • Page 41 Host Name - This option specifies the Host Name of the Router. Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-12 WAN - Dynamic IP...
  • Page 42 Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the following parameters (Figure 4-14): TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-13 WAN - Static IP -35-...
  • Page 43 Internet again. If you want your Internet connection keeps active all the time, please enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects. TL-MR3220 3G/3.75G Wireless Lite N Router -36-...
  • Page 44 MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. Service Name/AC Name - The service name and AC (Access Concentrator) name, which TL-MR3220 3G/3.75G Wireless Lite N Router -37-...
  • Page 45 Click the Save button to save your settings. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable. And you should enter the following parameters (Figure 4-16): TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-16...
  • Page 46 Idle Time because some applications are visiting the Internet continually in the background. Click the Save button to save your settings. If your ISP provides L2TP connection, please select L2TP option. And you should enter the following parameters (Figure 4-17): TL-MR3220 3G/3.75G Wireless Lite N Router -39-...
  • Page 47 If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. TL-MR3220 3G/3.75G Wireless Lite N Router -40-...
  • Page 48 Max Idle Time, since some applications is visiting the Internet continually in the background. If your ISP provides PPTP connection, please select PPTP option. And you should enter the following parameters (Figure 4-18): TL-MR3220 3G/3.75G Wireless Lite N Router -41-...
  • Page 49 Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection TL-MR3220 3G/3.75G Wireless Lite N Router -42-...

  • Page 50: Mac Clone

    4.5.4 MAC Clone Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the screen below, Figure 4-19: TL-MR3220 3G/3.75G Wireless Lite N Router -43-...

  • Page 51: Lan

    MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed. IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-20 LAN...

  • Page 52: Wireless

    Click any of them, and you will be able to configure the corresponding function. 4.6.1 Wireless Settings Choose menu “Wireless→Wireless Setting”, you can configure the basic settings for the wireless network on this page. TL-MR3220 3G/3.75G Wireless Lite N Router -45-...
  • Page 53 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-22 Wireless Settings SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address).
  • Page 54 20M, which is unable to be changed. Max Tx Rate - You can limit the maximum tx rate of the Router through this field. Enable Wireless Router Radio - The wireless radio of this Router can be enabled or disabled to allow wireless stations access.

  • Page 55: Wireless Security

    Choose menu “Wireless→Wireless Security”, you can configure the security settings of your wireless network. There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key), WPA-PSK (Pre-Shared Key). TL-MR3220 3G/3.75G Wireless Lite N Router -48-...
  • Page 56 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-23 Disable Security - If you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security. WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 4-24.
  • Page 57 • Version - you can choose the version of the WPA security on the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-24...
  • Page 58 Automatic, or TKIP or AES as Encryption. Note: If you check the WPA-PSK/WPA2-PSK will find a notice in red as shown in TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-25 radio button and choose TKIP encryption, you Figure 4-19.

  • Page 59: Wireless Mac Filtering

    Description - A simple description of the wireless station. To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-28: TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-26...
  • Page 60 B with MAC address 00-0A-EB-00-23-11 are able to access the Router, but all the other wireless stations cannot access the Router, you can configure the Wireless MAC Address Filtering list by following these steps: 1. Click the Enable button to enable this function. TL-MR3220 3G/3.75G Wireless Lite N Router -53-...

  • Page 61: Wireless Advanced

    Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-29 Wireless Advanced...

  • Page 62: Wireless Statistics

    4.6.5 Wireless Statistics Choose menu “Wireless→Wireless Statistics”, you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station. TL-MR3220 3G/3.75G Wireless Lite N Router -55-...

  • Page 63: Dhcp

    Choose menu “DHCP→DHCP Settings”, you can configure the DHCP Server on the page (shown in Figure 4-32 ).The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to TL-MR3220 3G/3.75G Wireless Lite N Router -56-...
  • Page 64 TL-MR3220 3G/3.75G Wireless Lite N Router the Router on the LAN. Figure 4-32 DHCP Settings DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually.

  • Page 65: Dhcp Clients List

    PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-33 DHCP Clients List...
  • Page 66 Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable/ Disabled All button to make all entries enabled/disabled TL-MR3220 3G/3.75G Wireless Lite N Router -59-...

  • Page 67: Forwarding

    (in XXX – YYY format, XXX is the start port number, YYY is the end port number). IP Address - The IP Address of the PC providing the service application. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-37 Virtual Servers...
  • Page 68 Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable/ Disabled All button to make all entries enabled/ disabled. Click the Delete All button to delete all entries. TL-MR3220 3G/3.75G Wireless Lite N Router -61-...

  • Page 69: Port Triggering

    A response using one of these ports will be forwarded to the PC that triggered this rule. You can input at most 5 groups of ports (or port section). TL-MR3220 3G/3.75G Wireless Lite N Router...
  • Page 70 Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable All button to make all entries enabled TL-MR3220 3G/3.75G Wireless Lite N Router -63-...

  • Page 71: Dmz

    Play) in the screen (shown in Figure 4-42).The UPnP feature allows the devices, such as Internet computers, to access the local host resources or devices as needed. UPnP devices can be automatically discovered by the UPnP service application on the LAN. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-41 DMZ...

  • Page 72: Security

    There are four submenus under the Security menu as shown in Figure 4-43: Basic Security, Advanced Security, Local Management and Remote Management. Click any of them, and you will be able to configure the corresponding function. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-42 UPnP Setting...

  • Page 73: Basic Security

    Router, keep the default, Enabled. IPSec Passthrough - Internet Protocol Security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-44 Basic Security...

  • Page 74: Advanced Security

    Click the Save button to save your settings. 4.9.2 Advanced Security Choose menu “Security → Advanced Security”, you can protect the Router from being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure 4-45. TL-MR3220 3G/3.75G Wireless Lite N Router -67-...
  • Page 75 TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-45 Advanced Security Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood.

  • Page 76: Local Management

    Choose menu “Security → Local Management”, you can configure the management rule in the screen as shown in Figure 4-46. The management feature allows you to deny computers in LAN from accessing the Router. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-46 Local Management...

  • Page 77: Remote Management

    If set to 255.255.255.255, then all the hosts can access the Router from internet. Note: To access the Router, you should type your Router's WAN IP address into your browser's TL-MR3220 3G/3.75G Wireless Lite N Router Remote Management”, you can configure the Remote...

  • Page 78: Parental Control

    Schedule - The time period allowed for the PC controlled to access the Internet. For detailed information, please go to “Access Control → Schedule”. Modify - Here you can edit or delete an existing entry. TL-MR3220 3G/3.75G Wireless Lite N Router -71-...
  • Page 79 Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page. TL-MR3220 3G/3.75G Wireless Lite N Router -72-...
  • Page 80 3. Click “Parental Control” menu on the left to go back to the Add or Modify Parental Control Entry page: Click Add New... button. Enter 00-11-22-33-44-AA in the MAC Address of Child PC field. Enter “Allow Google” in the Website Description field. Enter “www.google.com” in the Allowed Domain Name field. TL-MR3220 3G/3.75G Wireless Lite N Router -73-...

  • Page 81: Access Control

    Target and Schedule. Click any of them, and you will be able to configure the corresponding function. 4.11.1 Rule Choose menu “Access Control → Rule”, you can view and set Access Control rules in the screen as shown in Figure 4-52. TL-MR3220 3G/3.75G Wireless Lite N Router -74-...
  • Page 82 3. Select a host from the Host drop-down list or choose “Click Here To Add New Host List”. 4. Select a target from the Target drop-sown list or choose “Click Here To Add New Target List”. TL-MR3220 3G/3.75G Wireless Lite N Router -75-...
  • Page 83 3. Click “Access Control → Schedule” in the left to enter the Schedule Settings page. Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is 1800 and Stop Time is 2000. TL-MR3220 3G/3.75G Wireless Lite N Router -76-...

  • Page 84: Host

    Modify - To modify or delete an existing entry. To add a new entry, please follow the steps below. Click the Add New… button. In the Mode field, select IP Address or MAC Address. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-54 Host Settings -77-...
  • Page 85 3. In Host Description field, create a unique description for the host (e.g. Host_1). 4. In MAC Address field, enter 00-11-22-33-44-AA. 5. Click Save to complete the settings. Then you will go back to the Host Settings page and see the following list. TL-MR3220 3G/3.75G Wireless Lite N Router -78-...

  • Page 86: Target

    2) In Domain Name field, enter the domain name, either the full name or the keywords (for example google) in the blank. Any domain name with keywords in it (www.google.com, www.google.cn) will be blocked or allowed. You can enter 4 domain names. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-57 Target Settings -79-...
  • Page 87 1. Click Add New… button in Figure 4-57 to enter the Add or Modify an Access Target Entry page. 2. In Mode field, select Domain Name from the drop-down list. TL-MR3220 3G/3.75G Wireless Lite N Router www.google.com only, you should first follow the...

  • Page 88: Schedule

    4. In Time field, you can select all day-24 hours or you may enter the Start Time and Stop Time in the corresponding field. 5. Click Save to complete the settings. Click the Delete All button to delete all the entries in the table. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-60 Schedule Settings -81-...

  • Page 89: Static Routing

    Choose menu “static routing”, you can configure the static route in the next screen (shown in Figure 4-62). A static route is a pre-determined path that network information must travel to reach a specific host or network. TL-MR3220 3G/3.75G Wireless Lite N Router www.google.com...
  • Page 90 Select Enabled or Disabled for this entry on the Status pull-down list. Click the Save button to make the entry take effect. Other configurations for the entries: Click the Delete button to delete the entry. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-62 Static Routing -83-...

  • Page 91: Bandwidth Control

    Line Type - Select the right type for you network connection. If you don’t know how to choose, please ask your ISP for the information. Egress Bandwidth - The upload speed through the WAN port Ingress Bandwidth - The download speed through the WAN port. TL-MR3220 3G/3.75G Wireless Lite N Router -84-...

  • Page 92: Rules List

    To add/modify a Bandwidth Control rule, follow the steps below. Step 1: Click Add New… shown in Figure 4-66, you will see a new screen shown in Figure 4-67. Step 2: Enter the information like the screen shown below. TL-MR3220 3G/3.75G Wireless Lite N Router -85-...

  • Page 93: Ip & Mac Binding Setting

    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-67 Bandwidth Control Rule Settings Step 3: Click the Save button. 4.14 IP & MAC Binding Setting Figure 4-68 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-68): Binding Setting and ARP List.
  • Page 94 To find an existing entry, follow the steps below. Click the Find button as shown in Figure 4-69. Enter the MAC Address or IP Address. Click the Find button in the page as shown in Figure 4-71. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-69 Binding Setting -87-...

  • Page 95: Arp List

    Status - Indicates whether or not the MAC and IP addresses are bound. Configure - Load or delete an item. Load - Load the item to the IP & MAC Binding list. Delete - Delete the item. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-72 ARP List -88-...

  • Page 96: Dynamic Dns

    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list. Click the Refresh button to refresh all items.

  • Page 97: Dyndns.org Ddns

    Connection Status -The status of the DDNS service connection is displayed here. Click Logout to log out of the DDNS service. 4.15.2 Dyndns.org DDNS If the dynamic DNS Service Provider you select is www.dyndns.org, the page will appear as shown in Figure 4-74. TL-MR3220 3G/3.75G Wireless Lite N Router -90-...

  • Page 98: No-Ip.com Ddns

    Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 4.15.3 No-ip.com DDNS If the dynamic DNS Service Provider you select is www.no-ip.com, the page will appear as shown in Figure 4-75. TL-MR3220 3G/3.75G Wireless Lite N Router -91-...

  • Page 99: System Tools

    Connection Status - The status of the DDNS service connection is displayed here. Click Logout to log out the DDNS service. 4.16 System Tools Figure 4-76 The System Tools menu Choose menu “System Tools”, and you can see the submenus under the main menu: Time TL-MR3220 3G/3.75G Wireless Lite N Router -92-...

  • Page 100: Time Setting

    Click the Get GMT button to get system time from Internet if you have connected to the Internet. Note: This setting will be used for some time-based functions such as firewall. You must specify TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-77 Time settings -93-...

  • Page 101: Diagnostic

    Traceroute - This diagnostic tool tests the performance of a connection. Note: You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-78 Diagnostic Tools -94-...

  • Page 102: Firmware Upgrade

    Timeout” are used for Ping function. Option “Tracert Hops” are used for Tracert function. 4.16.3 Firmware Upgrade Choose menu “System Tools → Firmware Upgrade”, you can update the latest version of firmware for the Router on the following screen. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-79 Diagnostic Results -95-...

  • Page 103: Factory Defaults

    4) The Router will reboot after the upgrading has been finished. 4.16.4 Factory Defaults Choose menu “System Tools → Factory Defaults”, and you can restore the configurations of the Router to factory defaults on the following screen TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-80 Firmware Upgrade firmware...

  • Page 104: Backup & Restore

    The current configuration will be covered by the uploading configuration file. The upgrade process lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the upgrading process to prevent any damage. TL-MR3220 3G/3.75G Wireless Lite N Router -97-...

  • Page 105: Reboot

    4.16.7 Password Choose menu “System Tools → Password”, you can change the factory default user name and password of the Router in the next screen as shown in Figure 4-84. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-83 Reboot the Router...

  • Page 106: System Log

    Auto Mail Feature - Indicates whether auto mail feature is enabled or not. Mail Settings - Set the receiving and sending mailbox address, server address, validation information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-84 Password...
  • Page 107 Figure 4-86 Click Save to keep your settings. Click Back to return to the previous page. Log Type - By selecting the log type, only logs of this type will be shown. TL-MR3220 3G/3.75G Wireless Lite N Router -100-...

  • Page 108: Statistics

    60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic. Sorted Rules - Choose how displayed statistics are sorted. Select the Auto-refresh checkbox to refresh automatically. Click the Refresh button to refresh immediately. TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-87 Statistics -101-...
  • Page 109 Reset the value of he entry to zero. Modify Delete the existing entry in the table. Delete There would be 5 entries on each page. Click Previous to return to the previous page and Next to the next page. TL-MR3220 3G/3.75G Wireless Lite N Router -102-...

  • Page 110: Appendix A: Faq

    Idle Time, since some applications is visiting the Internet continually in the background. If you are a Cable user, please configure the Router following the above steps. How do I configure the Router to access Internet by Ethernet users? TL-MR3220 3G/3.75G Wireless Lite N Router -103-...
  • Page 111 Servers" page, click Add New…. Then on the “Add or Modify a Virtual Server Entry” page, enter “1720” for the “Service Port” blank, and your IP address for the “IP Address” blank, taking 192.168.1.169 for an example, remember to Enable and Save. TL-MR3220 3G/3.75G Wireless Lite N Router Figure A-3 MAC Clone...
  • Page 112 How to enable H323 ALG: Log in to the Router, click the “Security” menu on the left of your browser, and click “Basic Security” submenu. On the “Basic Security” page, check the Enable radio button next to H323 ALG. Remember to click the Save button. TL-MR3220 3G/3.75G Wireless Lite N Router Figure A-6 DMZ...
  • Page 113 Figure A-8 Remote Management Note: If the above configuration takes effect, to configure to the Router by typing http://192.168.1.1:88 (the Router’s LAN IP address: Web Management Port) in the address TL-MR3220 3G/3.75G Wireless Lite N Router Figure A-7 Basic Security -106-...
  • Page 114 Figure A-10 Add or Modify a Virtual server Entry The wireless stations cannot connect to the Router. Make sure the "Wireless Router Radio" is enabled. Make sure that the wireless stations' SSID accord with the Router's SSID. Make sure the wireless stations have right KEY for encryption when the Router is encrypted.

  • Page 115: Appendix B: Configuring The Pcs

    Connections tab in the appearing window. Right click the icon that showed below, select Properties on the prompt page. In the prompt page that showed below, double click on the Internet Protocol (TCP/IP). TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-1 -108-...
  • Page 116 Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the Figure below: TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-2 -109-...
  • Page 117 Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can type the DNS server IP address, which has been provided by your ISP TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-3 -110-...
  • Page 118 TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-4 Now click OK to keep your settings. -111-...

  • Page 119: Appendix C: Specifications

    Operating : 0℃~40℃ (32 ~104 Temperature. Storage: -40℃~70℃(-40℉~158℉) Operating: 10% ~ 90% RH, Non-condensing Humidity Storage: 5% ~ 90% RH, Non-condensing TL-MR3220 3G/3.75G Wireless Lite N Router EIA/TIA-568 100Ω STP (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) ℉ ℉) -112-...

  • Page 120: Appendix D: Glossary

    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding.
  • Page 121 TL-MR3220 3G/3.75G Wireless Lite N Router connection. SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card.

  • Page 122: Appendix E: Compatible 3G/3.75G Usb Modem

    E1756, E1550, E1762, K3565, EC122, EC1260, EC1261 MF100, MF102, MF626, MF627, MF637U, MF645, AC581, AC2736, AC581, MU351 U760 NOVATEL NOKIA CS-10 ONDA MSA501HS X060S, X070S ALCATEL 4G SYSTEM XSStick W12 U1-TF SAMSUNG SGH-H128 TL-MR3220 3G/3.75G Wireless Lite N Router -115-...

Table of Contents