TP-Link TL-MR3220 Quick Installation Manual

Quick Installation Guide
TL-MR3220
3G/4G Wireless N Router
3 Hardware Connection
TL-MR3220 supports both 3G/4G and WAN connection. If both the 3G/4G USB Modem and WAN port are connected, TL-MR3220 will choose one of them to access the Internet according to your configuration. For detailed information, please refer to Step 4 in
Connect TL-MR3220 to 3G/4G network
1
Connect the notebook/PC to the LAN port of TL-MR3220 with an Ethernet cable;
2
Plug the power adapter into the power jack of TL-MR3220;
3
Insert 3G/4G USB modem into the USB port (Ensure the SIM card is in the modem);
4
Press the ON/OFF button to power on TL-MR3220.
SOCKET
TL-MR3220
2
4
1 Package Contents
TL-MR3220
3G/4G Wireless N Router
3G/4G
Network
3
Notebook
1
2 Physical Description
• Front Panel
• Rear Panel
Power
3
4 LAN Ports
ON/OFF Button
• Side Panel
Wi-Fi Button
Connect TL-MR3220 to WAN network
1
Power o the ADSL/Cable Modem;
2 Connect the notebook/PC to the LAN port of TL-MR3220 with an Ethernet cable;
Connect the ADSL/Cable Modem to the WAN port of TL-MR3220 with an Ethernet cable;
3
Plug the power adapter into the power jack of TL-MR3220;
4
Power on the modem and wait until all LEDs ash properly; Press the ON/OFF button to power on TL-MR3220.
SOCKET
TL-MR3220
Notebook
3 4
2
Item
• On: The electrical power is on.
Power
• O : There is no electrical power.
• On: The Router is initializing.
System • Flashing: The Router is working properly.
• O : The Router has a system error.
• Flashing: The wireless function is enabled.
WLAN
• O : The wireless function is disabled.
• On: A device is linked to the
corresponding port.
WAN
• Flashing: There is data being received or
sent on the corresponding port.
LAN 1~4
• O : There is no device linked to the
corresponding port.
• O : The USB 3G/4G modem is not connected.
WPS/RESET Button
• Flashing: Data is being received/sent
WAN Port
through the 3G/4G modem.
USB
• On: The USB 3G/4G modem is connected
but no data being transferred.
• Slow Flash: A wireless device is connecting
to the network. This process will last in the
rst 2 minutes.
• On: A wireless device has been successfully
WPS added to the network.
• Quick Flash: A wireless device failed to be
added to the network.
• O : WPS function is disabled.
USB Port
Part 4 Router Con guration.
Warning：
1. We recommend you to use only the
Power Adapter provided with the device.
2. Place the device on the level and
stable surface.
3. Unplug the Power Adapter in the
thunder storm to avoid damage.
4. Place the device in a well ventilated
place far from any heater or heating vent.
ADSL/Cable Modem
5. Keep the Router far from the water to
avoid damage.
LINE
LAN
1
2
Description