Forwarding; Virtual Servers - TP-Link TL-MR3220 User Manual

Click the Delete All button to delete all entries
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
4.8

Forwarding

Figure 4-36 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-36): Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.

4.8.1 Virtual Servers

Choose menu "Forwarding→Virtual Servers", you can view and add virtual servers in the
next screen (shown in Figure 4-37). Virtual servers can be used for setting up public services
on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all
requests from the Internet to this service port will be redirected to the computer specified by
the server IP. Any PC that was used for a virtual server must have a static or reserved IP
Address because its IP Address may be changed when using the DHCP function.
Service Port - The numbers of External Ports. You can type a service port or a range of
service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port
number).
IP Address - The IP Address of the PC providing the service application.
TL-MR3220
Figure 4-37 Virtual Servers
-60-
3G/3.75G Wireless Lite N Router