Access Management; Acl - TP-Link TD-8840T User Manual

ADSL Type: Select the ADSL operation type which your ADSL connection uses.

4.5 Access Management

Choose "Access Management", you can see the next submenus:
Click any of them, and you will be able to configure the corresponding function.

4.5.1 ACL

Choose "Access Management→ACL", you can see the next screen (shown in Figure 4-27). You
can specify the client to access the ADSL Router once setting his IP as a Secure IP Address
through selected applications.
ACL: If Activated, the IP addresses which are contained in the Access Control List can
access to the Router. If Deactivated, all IP addresses can access to the Router.
ACL Rule Index: Select the ACL rule index for the entry.
Active: Enable the ACL rule.
Secure IP Address: Select the IP addresses which are permitted to access to the Router
remotely. With the default IP 0.0.0.0, any client would be allowed to remotely access the
ADSL Router.
Application: Select the application for the ACL rule, and then you can access the Router
through it.
Interface: Select the interface for access: LAN, WAN or Both.
TD-8840T 4-port ADSL2/2+ Ethernet Router User Guide
Figure 4-26
Figure 4-27
32