Table of Contents
Advertisement
AXIS Q86 Series
1
Power cable (not included)
2
I/O cable (optional, not included)
3
Network cable (not included)
4
Cable gasket
5
Transparent base unit cover
8. Fit cable gaskets on the cables. See Cable thickness on page 29.
9. Insert the power, I/O and network cables including the cable gaskets through the holes in
the transparent base unit cover and arrange the cables as shown in the illustration above.
NO
NO
NO TICE
TICE
TICE
If you use both an optical fibre cable and an RJ45 cable for network connectivity, route the
optical fibre cable through the same cable gasket as the I/O cable. Apply a sealant between
the cables and the cable gasket to prevent leakage. For more information on different
network connectivity options, see Install the network link on page 21.
10. Replace the transparent base unit cover on the base unit and fit the cable gaskets inside
the holes.
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
18
Advertisement
Table of Contents
