Table of Contents
Advertisement
E3C246D4U2-2L2T / E3C246D4U2-2T / E3C242D4U2-2T
transmission speed. The options include [9600], [19200], [57600] and [115200].
Flow Control
Use this item to set the flow control to prevent data loss from buffer overflow. When
sending data, if the receiving buffers are full, a "stop" signal can be sent to stop the data
flow. Once the buffers are empty, a "start" signal can be sent to restart the flow. Hardware
flow uses two wires to send start/stop signals. The options include [None], [Hardware RTS/
CTS], and [Software Xon/Xoff].
Data Bits
Parity
Stop Bits
57
Advertisement
Table of Contents
