The Analytic Window; To Remove The Analytic Window From The Work Area - Texas Instruments TI-NSPIRE User Manual

From the View Menu, select the Graphing View tool.
b 2 1
Press
The display refreshes to show the axes and entry line.
Note: Any geometric constructions created while in the plane
geometry view are retained and displayed along with any previously-
created graphs.

The analytic window

The analytic (graphing) window is available in the plane geometry view.
It adds an analytic (graphing) window on top of a portion of the plane
geometry work area. This provides a combination work area that enables
you to use both work area types without toggling the view between
them.
To open the analytic window:
1. Ensure that the work area is in Plane Geometry view.
2. From the View menu, select Show Analytic Window
b 2 3
Press
3. A reduced size graphing window opens on the lower left corner of
the plane geometry space.
You can alter the work area, without changing the view, to temporarily:
• hide the axes. Any graphs or objects remain displayed on the
work area.
• hide the entry line.
• hide the scale.
• resize the axes using the zoom tools or by dragging tic marks.

To remove the analytic window from the work area

From the View menu, select Hide Analytic Window
b 2 3
Press
80
.
.
.
.
.
Using Graphs & Geometry