Creating A Scatter Plot - Texas Instruments TI-NSPIRE User Manual

Creating a Scatter Plot

If you do not have an existing set of data points available for plotting,
create them on the same page using the Lists & Spreadsheet application.
1. To create the data lists and scatter plot on the same page, select a
page configuration with two work areas.
2. Create the data lists on the Lists & Spreadsheet portion of the page.
3. Select the Scatter Plot tool (
b 3 3
Press
4. Select the lists to plot from the drop down list for each axis.
5. When both entry fields have a data list specified, the scatter plot
displays on the Graphs & Geometry work area.
90
)
.
Using Graphs & Geometry