Backing Up Files To A Computer; Resetting The Memory - Texas Instruments TI-NSPIRE User Manual

You can download an OS upgrade from the Texas Instruments Web site
to a computer, and use a USB computer cable to install the OS on your
TI-Nspire™ handheld.
For complete information, refer to the instructions in the chapter on
TI-Nspire™ Computer Link Software.

Backing up files to a computer

Use the TI-Nspire™ Computer Link Software or TI Connect (with the TI-84
Plus keypad) to back up the contents of your handheld to a computer.
TI-Nspire™ Computer Link Software and TI Connect software are
available on the product CD that came with your handheld.

Resetting the memory

The Reset button on the underside of the handheld resets all memory.
When resetting all memory on the TI-Nspire™ handheld, RAM and Flash
memory is restored to factory settings. All files will be deleted. All system
variables are reset to default settings.
Caution: Before you reset all memory, consider restoring sufficient
available memory by deleting only selected data. If you reset all memory,
the pre-installed apps on your handheld will be deleted.
To reset all memory on the handheld, follow these steps.
1. Use a paper clip or ball point pen to press the Reset button on the
underside of the handheld.
2. Hold for three seconds, and release.
Handheld memory is cleared.
When you clear memory, the contrast cometimes changes. If the screen is
faded or blank, adjust the contrast by pressing
20
/ + / -
or
Getting Started
.