Setting Up The Table - Texas Instruments TI-86 Manual Book

To display the table using the
current table setup settings,
select from the
TABLE
menu.
TABLE
and @Tbl must be
TblStart
real numbers; you can enter
an expression.
In graphing mode,
DifEq
it is a good practice to set
= and
TblStart tMin
@Tbl = .
tStep

Setting Up the Table

To display the table setup editor, select
menu. The screen to the right shows the default
TABLE
table setup settings.
specifies the first independent variable value (
TblStart
or ) in the table (only when
t
@Tbl (table step) specifies the increment or decrement from one independent variable value
to the next independent variable value in the table.
If is positive, then the values of
@Tbl
If is negative, then the values of
@Tbl
displays independent variable values automatically in the first column of the table,
Indpnt: Auto
starting at .
TblStart
displays an empty table. As you enter
Indpnt: Ask
each value is added to the independent variable column and the corresponding dependent
variable values are calculated and displayed. When
independent variable values that are currently displayed in the table.
from the
TBLST
is selected).
Indpnt: Auto
, , or increase as you scroll down the table.
x q t
, , or decrease as you scroll down the table.
x q t
values in the
x
Ask
Chapter 7: Tables
, ,
x q
value b),
prompt (
x= x=
is set, you cannot scroll beyond the six
113