Table of Contents
Advertisement
Digital broadcasts cannot be received.
• To receive an encrypted broadcast, a CI module
valid for the broadcast is required.
[UBS70]
• The dish may not be pointing in the direction of
the satellite. If problem persists consult your
local TV aerial installer.
• When you use only one terminal, you may not
view correctly if you connect the satellite cable
to the LNB IN 2 terminal.
• A wrong single cable version is set. Perform
Easy Setting again. (
[UBC70]
Major channels and favourite channels are not
displayed on the top part of the channel list.
• [DVB-C] To change channel allocation, restart
Auto Setup in Basic Settings menu and change
channel number allocation selection. (
• You can change channel number assignment.
(
52)
[UBC70] [DVB-T] [DVB-T2]
[UBS70]
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
To select free channel.
• Select Free TV using channel list with blue
button. (
13)
• Use the category selection on the TV Guide.
(
17)
TV Guide
The TV Guide information is not displayed
properly.
• Set the clock correctly. (
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
• It may take time until the TV Guide screen is
displayed correctly. Wait for about a day.
64
TQBS0166
9)
51)
60, Clock)
Network
When using Wireless LAN connection, video
is not played back or video frames are
dropped.
• On the "Wireless Settings" screen (
continuous lighting of at least four "Reception"
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your wireless router. If there is no
improvement, connect to a wired network and
perform the "Easy Network Setting" (
again.
• Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (
8, 10)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
– Conversion Setting for DLNA (
– Resolution Setting for DLNA (
• The unit cannot be used as a server while you
are watching or playing back a 4K programme,
for example.
You cannot play contents properly from DLNA
compatible equipment on the network.
• Following programmes etc. may not be played
back:
– A programme with access restriction
– A programme with contents protection (
– A programme with incompatible format
– An encrypted programme (
57), the
10, 57)
58)
58)
71)
)
Advertisement
Table of Contents
