Table of Contents
Advertisement
[DVB-C] Settings for DVB-C Channels
[DVB-T] [DVB-T2] Settings for DVB-T Channels
Channel List
You can edit the channel list.
• To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
• Red: Change the sorting mode.
[alphabetical order (A. B. C...) etc.]
• Yellow: Reveal all channels.
• Blue: Change the Category.
• To move the channel number assignment
1 Select the channel to move, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
[DVB-C]
1 Adjust the frequency, symbol rate and service
ID. (For details, consult the cable company.)
• Adjust the frequency by checking the
signal strength and signal quality.
2 Select "Start scan", then press [OK].
[DVB-T] [DVB-T2]
1 Press [3, 4] to select the frequency.
2 Press [OK] to start scan.
Update Channel List
You can update the channel list to the latest one.
Signal Condition
You can check the quality and strength of signals.
Press [CH W X] to select the channel.
[DVB-C]
• When the signal is too strong (red bar), reduce the
CATV signal. (For details, consult your dealer or the
cable company.)
• When the signal is weak, check that the current
broadcast channel is correctly broadcasting.
[DVB-T] [DVB-T2]
• The channels you can receive are affected by length
of the cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the
signal amplification at your aerial. (For details, consult
your dealer.)
52
TQBS0166
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Child Lock
You can restrict the viewing/playback/recording
of channels unsuitable to children.
• PIN is required to change. (
Child Lock List
1 Select the channel to lock.
2 Press [OK].
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
Parental Rating
Set a ratings level to limit broadcast viewing
and playback.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
Audio Preference
Select the audio preference (Multichannel, Stereo
or MPEG). The type of audio to be output when
you watch a TV programme or play back a
recorded programme will be determined by the
selected preference.
• This is displayed only when Germany is set as
your country of residence in "Easy Setting".
(
9)
Audio Description
When "Automatic" is selected, Audio Description
will be set as default while watching.
• When "Dolby D / Dolby D + / Dolby TrueHD" or "HE-AAC"
is set to "Bitstream", the Audio Description may not work.
Set them to "PCM" (
56, Digital Audio Output).
HbbTV Setting
Turn on/off the HbbTV service.
• When "On" is selected, HbbTV service are
available.
14)
Advertisement
Table of Contents
