Using The Shredding Disk In The L Arge Workbowl - Black & Decker PERFORMANCE P6010 Manual

Note: Heavy pressure on the pusher does not speed the work; use the pusher
only as a guide. Let the processor do the work. Pushing too hard may result in
inconsistent slicing thickness.
Note: It is possible to change the thickness of your slices by changing pressure
on the food item when guiding it into the feed tube. Use more pressure for a
thicker slice and less pressure for a thinner slice.
Note: Changing thickness settings with other disks or blades installed will have
no effect on the operation.
6. When finished, press PULSE|OFF and allow the disk to stop revolving completely
and unplug the appliance before removing lid. Twist lid clockwise to remove.
7. Carefully remove slicing disk by lifting straight up off center post.
8. Unlock workbowl by turning it clockwise and lift off base.
9. Empty workbowl and unplug appliance when not in use.
US IN G T H E S HRE D D IN G D ISK IN THE LA RG E
WO R K B OWL
1. Lock the large workbowl into position.
2. Place blade shaft onto center post in large workbowl.
3. Insert your fingers into the 2 large holes on the
disk with the desired side up (small holes for fine
shredding and large holes for coarse shredding)
and place shredding disk onto blade shaft in workbowl (M). You may need
to rotate disk slightly until it fits onto post.
4. Place lid on workbowl and lock into place by rotating counterclockwise.
5. Place food in feed chute and use food pusher to guide foods towards
shredding disk.
6. Press MEDIUM speed button; press lightly but firmly on food pusher to
guide food through processor.
Note: Heavy pressure on the pusher does not speed the work; use the pusher
only as a guide. Let the processor do the work.
7. When finished, press PULSE|OFF and allow the disk to stop revolving and unplug
appliance before removing lid. Twist lid clockwise toward unlock to remove.
8. Carefully remove shredding disk using the finger holes to lift straight up.
Pull shaft out of the workbowl. Unlock workbowl by turning it clockwise
and lift off base.
9. Empty workbowl.
10. Unplug appliance when not in use.
11
M