Sec 7 System Maintenance; Sec. 8 Warranty Terms And Conditions (World-Wide Purchase) - Promis COLpro222DX-OZview User Manual

Sec 7 SYSTEM MAINTENANCE
Cleaning Agent: Examples of disinfectants that can be used on the colposcope unit are listed below:
1. Dilute Sodium Hypoclorite (Bleaching Agent)
2. Diluted Formaldehyde 35%-37%
3. Hydrogen peroxide 3%
4. Alcohol 75%
5. Isopropanol 70%
The Digital Video colposcope can be cleaned with hospital-grade ethanol and dried in air or with crisp and clean
cloth. Cleaning Steps:
•
Turn off camera & colposcope, cut the connection with AC power supply.
•
Clean external part and stand
•
Clean connecting cables.
•
Wipe all the cleaned parts with dry cloth.
Warnings
•
Colposcope should be powered off and disconnected from AC power before cleaning.
•
Do not attempt to immerse any part of the equipment in cleaning solutions.
•
Do not use abrasive material to clean any part of Colposcope.
•
Do not use strong solvents to clean any part of Colposcope.
•
Do not leave any solution residue on the device, if so, please wipe it off quickly with a cloth damped in water
MAINTENANCE:
Please examine the following before using colposcope:
- Examine whether there is any mechanical damage
- Examine all external cables, insert parts and accessories.
- Examine all parts, which connect to patients and make sure they are in good working condition.
- If any damage is found, please contact manufacturer or its authorized technical personnel engineer.
When inspecting the system, pay attention to the following:
- Make a visual inspection to ensure there are no damaged parts.
- Make sure that there is no damage between plug and cable, and all the pins and plugs are not loose.
- Check whether the connection between vertical stand, monitor & camera is correct & unbroken.
- Check there is no cable breakage by moving each end of the cable.
Camera Head Maintenance:
- Camera head is an important part of colposcope, dust particles can accumulate on it and may affect colposcope
performance, if fingerprint is left on the camera lens it could lower the image quality and it is really harmful to the
camera lens coating, so it should be removed / cleaned quickly.
- Use soft brush to clean the camera.
- Put a drop of camera lens rinse solution on cotton paper, then use it to wipe camera surface.
Maintenance of unit
- Do not attempt to immerse any part of the equipment in cleaning solutions.
- Do not use abrasive material to clean any part of Colposcope.
- Do not use strong solvents to clean any part of Colposcope.
- Do not leave any solution residue on the device, if so, please wipe it off quickly with a cloth damped in
water
Operator's Manual Ver: PMA-VYR-0218NA-GIMA
- 11 - COLpro222DX-OZview