Table of Contents
Advertisement
Maintenance
The sprayer system is lifetime lubricated. The only main-
tenance required is filter cleaning and replacement.
Filter Operation
The sprayer filter must be clean at all times to provide
sufficient air flow to cool the motor and atomize the fluid.
The sprayer has an air filter indicator light on the front
panel. The indicator light illuminates if the filter is clogged
or has low airflow.
Cleaning Filter
1. Turn off and unplug sprayer.
2. Loosen four screws (18), remove filter retainer (17)
and pre-filter (20).
3. Remove main filter (21) and clean using one of the
following methods:
8
•
Tap filter gently on flat surface, dirty side down.
•
Direct, compressed air (100 psi(7 bar, 70 MPa)
maximum) through filter panel in the opposite
direction of arrows on side of filter (from the clean
side to the dirty side.
•
Soak filter for 15 minutes in water and mild deter-
gent. Rinse filter until clean. Air dry.
To avoid electric shock, never install a damp filter in
the turbine. Installing a damp filter in sprayer can also
damage turbine.
8049a
21
20
17
18
Maintenance
ti13061a
313753J
Advertisement
Table of Contents
