Table of Contents
Advertisement
Assembly Instructions Page 3
5
BOTTOM
5
Turn Seat Platform over. Attach Spreader Bar
the front of Seat Platform
Bolt on each side.
7
Shooting
Rail Knob
P
Hole for
70
M6x70mm Bolt w/Spacer
Attach Arm Rest Cover to each Armrest
Note where the holes are located on the armrests.
Slide Shooting Rail Bracket
7
Attach Shooting Rail Knob
Bracket
P
.
NOTE: Shooting Rail Knob will be facing the
outside of the stand as the Assembled Shooting
Rail will rest on top of these knobs.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
Q
50
N
Q
N
using 1-M6x50mm
O
Hole for
M6x100mm Bolt
O
.
P
onto each armrest.
V
to Shooting Rail
6
55b
E
Slide Backrest Fabric onto Backrest Supports
to
50
6
Attach Seat Platform
Handle Rails
w/Bushings
Note: The Bushings will be placed between the
bracket and the Seat Frame.
8
E
Attach the front of each Armrest
and
F
with 1-M6x70mm Bolt w/Spacer
side. Place the Spacer between the Armrest and the
8
Handle Rail.
Attach the rear of each Armrest
E
and
F
. Place the Spacer between the Armrest and
the Handle Rail. Use 1-M6x100 Bolt w/ Spacer and
Bushing
100
step. But DO NOT tighten the bolt yet.
Model: HEH00774
Outpost Xl 17' Ladder Treestand
N
N
between brackets on
E
and
F
using 2-M8x55mm Bolts
on each side.
55b
N
100
70
O
to Handle Rail
70
O
to each Handle Rail
to hold the armrest in place for the next
primalvantage.com/field-stream
55b
F
K
.
F
E
on each
©2019 (rev. 1/19)
Advertisement
Table of Contents
