Table of Contents
Advertisement
Ratchet Strap Instructions
1
1
Place looped end of Ratchet
under platform.
4
4
Place looped end of strap
under platform.
Detailed Ratchet Strap Instructions
1
2
Open ratchet handle
Pull Strap through
flat and insert end of
strap through opening.
YOU MUST READ AND FOLLOW ALL INSTRUCTIONS PRIOR TO INSTALLATION
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
2
2
5
3
Insert end of strap
opening.
through slot in ratchet
wheel.
Insert Ratchet through loop.
5
Insert strap through loop.
4
Ratchet handle back
and forth to tighten
strap. Ensure that the
ratchet wheel makes
at least one and a
half revolutions once
installed. DO NOT
allow the ratchet
wheel to over-fill and
contact the ratchet
mechanism of the
ratchet strap.
Model: HEH00774
Outpost Xl 17' Ladder Treestand
3
3
Pull to tighten.
6
6
Pull to tighten.
5
6
To release tension, push
After strap is tight,
spring loaded retaining lock
close handle to
and simultaneously pull
the locked position.
primalvantage.com/field-stream
on strap.
©2019 (rev. 1/19)
Advertisement
Table of Contents
