Table of Contents
Advertisement
Installation Instructions Page 2
5
5.
Move base of ladder toward or
away from tree slightly in order to
5
make Platform as parallel to the
ground as possible.
Apply your full weight to the first
step so it settles into the ground.
Detailed Stabilizer Strap Installation
1
Hold Strap as shown.
Buckle Instructions
1
Hold buckle as shown.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
6
6.
Attach Buckle Strap
the brace of the inner part of
Stabilizer Bar
Strap Installation below.
6
(See Strap Installation Below)
Position the Stabilizer Bar against
the tree and secure it by wrapping
the strap around the back of the
tree once and insert the strap into
the buckle.
(See Buckle Instructions Below)
2
Insert Strap through
looped end.
2
Press down on latch and
insert strap underneath
teeth as shown.
NOTE:
Drawings are for illustration purposes only and may not depict actual product.
Outpost Xl 17' Ladder Treestand
7
7.
Z
Z
just behind
D
by following the
7
3
Pull Strap to tighten.
3
Pull strap to desired length.
Model: HEH00774
Cross Installation Straps behind tree.
Attach to the top rung of the bottom
ladder section.
(See Installation Strap Instructions)
4
Use these same instructions
to attach the buckle.
4
Pull slack to tighten.
primalvantage.com/field-stream
©2019 (rev. 1/19)
Advertisement
Table of Contents
