How To Change The Lockout Time - Acorn MASTER-TROL User Manual

4. The old "ON TIME" will be displayed at the
top. Enter the "tenths of a second" (0-9) you
require, then press "ENTER".
5. Enter the number of seconds (0-59) you
require, then press "ENTER".
6. Enter the number of minutes (0-59) you
require, then press "ENTER".
7. The Handheld Programmer will breifly
confirm the new "ON TIME".
8. After confirmation, the Handheld
Programmer will return to the controller/
station screen. You can change the "ON
TIME" for a new valve, or press the
"ESCAPE" button to change a different
feature.

How to change the LOCKOUT TIME:

1. From the "PRESS YOUR DESIRED
FUNCTION KEY" screen, press the
"LOCKOUT TIME" button.
2. If you are connected to multiple controllers,
enter the controller address that contains
the valve you want to program and press
"ENTER". If not, proceed to step #3.
3. Enter the station number of the valve you
want to program and press "ENTER".
www.acorneng.com
8 Technical Support: (800) 743-8259
LOCKOUT
TIME