Advertisement
4.4 Programming the Signal Relay
Once wiring and physicaly setup has been completed, to enable the Earth Fault alarm local indication
functionality please follow steps
a)
Select SETUP and
press ENTER
b)
Select Relay and
press ENTER
c)
Select Relay Mode
and press ENTER
d)
+/- keys to Select
Permanent under
Signal Settings and
press ENTER
e)
Test the alarm by
selecting Relay Test
and press ENTER
(c) Fronius Australia Pty. Ltd, 2023
a)
though to
e)
below.
9/10
Advertisement
