Advertisement
3.3 Checking for service messages in Solar.web
If inverter errors occur (including Earth Fault errors) the system will automatically send alarm notifications in the
form of e-mail messages, to nominated contacts (listed under
for users to check previous alarms for system in question. To do so follow steps below.
a)
Open Solar.web, select the appropriate system and navigate to
b)
Historical alarms including Earth Fault Alarms will be shown in the window marked in
An Earth Fault Alarm will be shown with the status code
NOTE: the historical alarms/messages (if any) are shown under the
relevant to the time selected in the data/time selector tool marked with blue. Time selection can be adjusted
based on your requirements.
(c) Fronius Australia Pty. Ltd, 2023
E-mail
section in CONTACTS). It is also possible
"SERVICE
MESSAGES".
475
or 502, with the description
red
marked area above. They will be
red
below.
"Isolation error"
5/10
Advertisement
