Seat Belt Restraint System - Hyundai KONA 2024 Owner's Manual

Seat belt restraint system

Lap/shoulder belt
To fasten your seat belt:
2C_SeatBeltWearStep
Pull the belt out of the retractor and insert
the metal tab (1) into the buckle (2). An
audible "click" sounds when the tab locks
into the buckle. Make sure the seat belt is
not twisted.
2C_SeatBeltWearStep_2
Place the lap belt (1) portion across your
hips and the shoulder belt (2) portion
across your chest.
The seat belt automatically adjusts to the
proper length after the lap belt portion is
adjusted manually so that it fits snugly
around your hips. If you lean forward in a
slow, easy motion, the belt extends and
moves with you.
If there is a sudden stop or impact, the
belt will lock into position. It will also lock
if you try to lean forward too quickly.
NOTICE
If you cannot smoothly pull the seat belt
out from the retractor, firmly pull the seat
belt out and release it. After release, the
belt may be pulled out smoothly.
WARNING
Improperly positioned seat belts may
increase the risk of serious injury in an
accident. Take the following precautions
when adjusting the seat belt:
• Position the lap portion of the seat belt
as low as possible across your hips, not
on your waist, so that it fits snugly. This
allows your strong pelvic bones to
absorb the force of the crash, reducing
the chance of internal injuries.
• Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.
• Always position the shoulder belt
anchor into the locked position at the
appropriate height.
• Never position the shoulder belt across
your neck or face.
Height adjustment
Adjust the height of the shoulder belt so
that it lies across your chest and midway
over your shoulder nearest the door, not
over your neck.
Adjust the height of the shoulder belt so
that it lies across your chest and midway
over your shoulder nearest the door, not
over your neck.
To adjust the height of the seat belt
anchor:
• Pull it up (1) to raise the height. To lower
it, push it down (3) while pressing the
height adjuster button (2). Release the
button to lock the anchor in place. Try
pushing the height adjuster down to
make sure that it is locked in place.
3
3-21