Driver Assistance System
Cruise Control (CC)
if equipped
2C_CCOverviewInfo
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at
speeds above 20 mph (30 km/h) without
depressing the accelerator pedal.
Cruise Control operation
Setting speed
1. Accelerate to the desired speed, which
must be more than 20 mph (30 km/h).
2. Press the Driving Assist button at the
desired speed. The set speed and
Cruise (
) indicator will illuminate
on the instrument cluster.
2C_SpeedControlButton
• A long press turns on MSLA, not
Cruise Control. Use a short press to
turn on Cruise Control.
7-68
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator pedal
is not depressed.
Information
• The vehicle may slightly slow down or
speed up while driving uphill or
downhill.
• The Driving Assist button symbol may
vary depending on your vehicle option.
Increasing set speed
2C_SpeedControlSwitch_2
• Push the + switch up and release it
immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.
• Push the + switch up and hold it while
monitoring the set speed on the
instrument cluster. The set speed will
increase to the nearest multiple of five
(multiple of ten in km/h) at first, and
then increase by 5 mph (10 km/h) each
time the switch is operated in this
manner.
Release the switch when the desired
speed is shown and the vehicle will
accelerate to that speed.