Table of Contents
Advertisement
Resetting the sunroof
2C_WideSunroofInitialize
In some circumstances resetting the
sunroof operation may need to be
performed. Some instances where
resetting the sunroof may be required
include:
• When the 12 V battery is either
disconnected or discharged
• When the sunroof fuse is replaced
• If the sunroof one-touch AUTO
OPEN/CLOSE operation is not
functioning properly
To reset the sunroof:
1. Start the vehicle in P (Park).
2. Make sure the power sunshade and
sunroof glass are in the fully closed
position.
3. Release the switch when the power
sunshade and sunroof glass is fully
closed.
4. Push the switch forward until the power
sunshade and sunroof glass moves
slightly. Then release the switch.
5. Push and hold the sunroof switch
forward again until the power sunshade
and sunroof glass slide open and close.
Do not release the switch until the
operation is completed. If you release
the switch, start again from step 2.
Information
If the sunroof is not reset after the vehicle
battery is disconnected or discharged, or
the sunroof fuse is blown, the sunroof
may not operate normally.
Sunroof open warning
2C_SunroofOpenWarning
If the driver turns off the engine when the
sunroof is not fully closed, the warning
chime sounds for several seconds and the
sunroof open warning appears on the
cluster display.
Close the sunroof securely when leaving
your vehicle.
NOTICE
Do not leave sunroof open when leaving
the vehicle to prevent theft or damage
from water entering the vehicle.
5
5-51
Advertisement
Chapters
Table of Contents
